Products

MX2501 HOBO TidbiT MX Temperature 400′ Data Logger

A waterproof temperature logger that uses the power of Bluetooth to deliver high-accuracy data straight to your mobile device or Windows computer running Onset’s free HOBOconnect app.
IMPORTANT INFORMATION
Requires a compatible mobile device or Windows computer and the HOBOconnect app. System requirements for the app can be found at the bottom of the HOBOconnect software page.

AED 591.00

Description

Range
-20° to 70°C in air(-4° to 158°F in air)-20° to 50°C in water(-4° to 122°F in water)
Accuracy
±0.25°C from -20° to 0°C(±.45°F from -4° to 32°F)
±0.2°C from 0° to 70°C(±0.36°F from 32° to 158°F)
Resolution
0.01°C(0.018°F)
Drift
<0.1°C per year(<0.18°F per year)
Response Time
17 minutes typical to 90% in air moving 1 m/s, unmounted
7 minutes typical to 90% in stirred water, unmounted

Logger

Logger Operating Range
-20° to 70°C (-4° to 158°F)
Buoyancy (Fresh Water)
3.1 g negative(0.11 oz negative)
Waterproof
To 122 m(To 400 ft)
Water Detection
Water conductivity level of 100 µS/cm or greater necessary for reliable detection of
water. Deionized water or water below 100 µS/cm may not be detected.
The water conductivity circuit may not reliably detect water that has frozen around
the electrodes, i.e. below 0°C (32°F).
Radio Power
1 mW(0 dBm)
Transmission Range
Approximately 30.5 m line-of-sight(Approximately 100 ft line-of-sight)
Wireless Data Standard
Bluetooth Low Energy (Bluetooth Smart)
Logging Rate
1 second to 18 hours
Time Accuracy
±1 minute per month at 25°C(±1 minute per month at 77°F)
Battery
CR2477 3V lithium, user replaceable
Battery Life
3 years, typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always
Off disabled in software.
5 years, typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always
Off or Bluetooth Off Water Detect enabled in software.
Faster logging intervals and statistics sampling intervals, burst logging, remaining
connected with the app, excessive downloads, and paging may impact battery life.
To ensure proper battery installation, see Battery Information for detailed
instructions on replacing the battery in the MX2203 logger.
Memory 96,000 measurements
Full Memory Download Time
Approximately 45 seconds; may take longer the farther the device is from the logger
Wetted Materials Polypropylene case, Delrin® battery cover, EPDM O-ring, stainless steel screws,

Santoprene® (TPE) boot

Dimensions
4.45 x 7.32 x 3.58 cm
1.75 x 2.88 x 1.41 inches)
Weight
36.2 g(1.28 oz)
Environmental Rating IP68

 

Reviews

There are no reviews yet.

Be the first to review “MX2501 HOBO TidbiT MX Temperature 400′ Data Logger”

Your email address will not be published. Required fields are marked *

Post comment